REPAIR EQUIPMENTS

TAPPING CLAMP

ATC-1 , ATC-2 are suitable for making sevise connections,fixing valves and ifttings.It is possible to supply an extensive range of outlets.The standard outlets are threaded according to ISO/ DIN or BSP. American CC or IP threads can be supplied upon request.



АТС – 1 (Aquaflex Tapping Clamp
- One section)

Range 40-260 mm

Length :

150-200-300-400 мм

АТС – 2 (Aquaflex Tapping Clamp-Two Section)

Range: 89-520 mm.

Length:

200-300-400-500-600 mm.

Material specification:

Specifications: Band: 304 or 316 Stainless Steel.316 is commanly used for sea water or in salty water with NBR rubber is recommended.

Bolts and 304 or 316 Stainless Steel. Bolts threads are teflon coated (gren or black)to prevent galling. (UNC Rolled thread –ASTM 193)

Nuts: attached to the clamp sidebar by means of a TIG weld.

Lugs: Type 304 or 316 Stainless Steel, MIG welded to clamp sidebar.

Sidebars: Type 304 or 316 Stainless Steel Tungsten Inert Gas (TIG) welded to form a strong, permanent fusion with the repair clamp band.

Lifter Bar: Type 304 or 316 Stainless Steel. Lip curve holds bolts in position while tightening and serves as a bearing surface for nuts.

Gasket: EPDM compounded for potable water service. Gasket ends are tapered for a dependable seal. NBR compounded for GAS industries. Also Potable NBR,SBR,VITON,SILICON can be used as requested.(Vulcanized rubber- ISO 814 NORM)

Armor: 304 or 316 Stainless Steel vulcanized and recessed into the gasket to ensure uniform compression against the pipe.

Passivated: All clamps are fully passivated by means of a chemical technique which restores the corrosion resistant characteristics of the stainless steel.After welding process.

Some Other Standards

* Welding parts for SS course bubble . NBN EN 287-1 –AISI 316

* Specification and qualification of welding procedures for metallic materials - Welding procedure test EN ISO 15614-1

* Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding NBN EN ISO 15609-1

* (Vulcanized rubber- ISO 814 NORM)

* Bolts: (UNC Rolled thread –ASTM 193)

Working PRESSURE Table
ATC -1 GAS WATER ATC - 2 GAS WATER
20 - 95 5 20 88 - 282 4 16
106 - 219 4 16 295 - 510 3 10
237 - 350 3 10 520 - 625 - 6
      705 - 755 - 4
* For different Sizes please contact us.

 

RUBBER GASKETS AVAILABLE

The workingpressure a repairclamp can withhold depends on a number of variables, for instance; diameter in combination with the ,used material and type of leakage**. In general, we can say following:

Rubber EPDM NBR VITON Potable NBR
Application

Hot Water / Steam and

several chemicals

Gas, Water, Oil and Several chemicals Very Hot water, almost all chemicals. Gas, Dirinking Water
Temperature -40º +130º -40º +130º -25º +220º -40º +130º
*For different special request please contact us.

 

Size of the threaded outlet or nipple Available on pipe Q Minumum Width mm
1/2" 40 мм 100 мм
3/4" 60 мм 150 мм
1" 72 мм 150 мм
11/4" 79 мм 150 мм
11/2" 83 мм 200 мм
2" 98 мм 200 мм
2 1/2" 115 мм 200 мм
3" 135 мм 300 мм